Product ID:6079 TINT WHITE MULTI-PURPOSE FINISH LOW SHEEN LATEX
MSDS Date:10/12/1994
FSC:8010
NIIN:00F013695
MSDS Number: BZTQK

COURTAULDS COATINGS INC

400 S 13TH ST
LOUISVILLE, KY 40203-1714
US

Emergency Phone: 800-854-6813

Info Phone: 502-588-9200

Cage: 50411

COURTAULDS COATINGS INC

LOUISVILLE, KY 40203-1714 US

Telephone: 502-588-9651

Cage: 50411

CRYSTALLINE-QUARTZ SILICA, SILICA DUST (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 3.8%

OSHA PEL 10 MG/CUM %RESP SIO2

ACGIH TLV: 0.1 MG/CUM RESP DUST

FORMALDEHYDE, FORMALIN (SUSPECTED HUMAN CARCINOGEN BY IARC;

CAS: 50-00-0

RTECS: LP8925000

ACGIH TLV: 0.37 MG/CUM IC (2A)

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

ETHYLENE GLYCOL, GLYCOL *96-2*

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 3%

OSHA PEL 50 PPM

ACGIH TLV: C 127 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE EYE, NOSE &
THROAT IRRITATION. MAY CAUSE ALLERGIC SKIN/RESPIRATORY REACTION IN
PEOPLE WHO ARE SENSITIVE TO ACRYLIC POLYMERS. REPEATED/PROLONGED
OVEREXPOSURE TO VAPORS COULD CAUSE LIVER, KIDNEY & NERVOUS SYSTEM
DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, HEADACHE, FATIGUE
Medical Cond Aggravated by Exposure:PEOPLE W/SENSITIVE/ALLERGIC
CONDITIONS.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH IMMEDIATELY
W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH W/LARGE AMOUNTS OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Lower Limits:0.7
Upper Limits:1
Extinguishing Media:FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:IN THE ABSENCE OF ELECTRICITY, A WATER
SPRAY/FOG NOZZLE MAY BE USED TO COOL CONTAINERS. WEAR SCBA. AVOID
EXPOSURE TO DECOMPOSITION.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM IGNITION SOURCES. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. AVOID BREATHING
VAPORS & VENTILATE AREA. REMOVE W/INERT ABSORBANT SUCH AS SAND,
KITTY LITTER. USE NON-SPARKING TOOLS.

Handling and Storage Precautions:SECURE CLOSURES & KEEP CONTAINERS
UPRIGHT TO PREVENT LEAKAGE. STORE LARGE QUANTITIES ONLY IN
BUILDINGS DESIGNED TO COMPLY W/OSHA 1910.106.
Other Precautions:DON'T STORE >120F. DON'T STORE/USE NEAR HEAT. DON'T
TAKE INTERNALLY. AVOID BREATHING VAPORS/SPRAY MIST & DON'T GET IN
EYES/ON SKIN. ALL ELECTRICAL EQUIPMENT & INSTALLATIONS SHOULD BE
MADE & GROUNDED I AW/THE NATIONAL ELECTRICAL CODE.

Respiratory Protection:OUTDOOR/OPEN AREAS W/UNRESTRICTED VENTILATION:
NIOSH/MSHA APPROVED MECHANICAL FILTER RESPIRATOR. IN RESTRICTED
VENTILATION AREA/NIOSH/MSHA APPROVED MECHANICAL FILTER RESPIRATORS.
IN CONFINED AREA: NIO SH/MSHA AIR-LINE RESPIRATOR/HOOD.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO REMOVE DECOMPOSITION
PRODUCTS DURING WELDING/FLAME CUTTING/SURFACES COATED W/PRODUCT.
Protective Gloves:HEAVY DUTY RUBBER, NEOPRENE
Eye Protection:SAFETY EYEWEAR W/SPLASH GUARDS
Other Protective Equipment:EYEWEAR W/SIDE SHIELDS, BODY PROTECTION SUCH
AS RUBBER APRON
Work Hygienic Practices:BEFORE SMOKING/EATING, WASH HANDS THOROUGHLY.
Supplemental Safety and Health
DON'T FLAME CUT, BRAZE/WELD W/O NIOSH/MSHA APPROVED MECHANICAL FILTER
RESPIRATOR/APPROPRIATE & ADEQUATE VENTILATION. IF EXPOSURE TO SPRAY
APPLICATION/ABRASIVE BLAST CLEANING, ENGINEERING & ADMINISTRAT IVE
CONTROLS MUST BE USED TO MAINTAIN AN EXPOSURE LEVEL LEVEL/USE A NIOSH/MSHA APPROVED RESPIRATORS.

Boiling Pt:B.P. Text:212F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:66

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, OPEN FLAME, ELECTRICAL EQUIPMENT,
HOT SURFACES, STATIC/FRICTION SPARKS & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS THAT APPLY TO INCINERATION/SECURE LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.